Samsung Digimax 210 SE User Manual Download Page 9

Page: 9 / 60

1 7

1 6

PREPARATION

°·

Battery life

¶U

This camera will generally to provide over 100 images using one set of
batteries under normal conditions.

To prevent accidental damage to the camera always use the strap.

°·

Refer to the illustrations above

Attaching the strap

°·

When using the AC adaptor.

¶U

If you have access to a mains supply , using an AC Adaptor allows the
camera to be used for long periods of time.

Reference

We recommends a battery like below.
°§

Duracell ULTRA ALKALINE battery of Duracell Company

°§

Maxi-Tech ALKALINE battery of Varta Company

°§

ALKALINE battery of Panasonic Company

Warning

°§

Always turn the power off before taking the AC adaptor out of the

mains supply.

°§

Treat the AC adaptor with the same care and attention that you would

with any mains device.

Use the retaining cord to prevent loss of the lens cap.

°·

Refer to the illustrations above

°ÿ

After using, keep the lenscap in connection with a strap.

Attaching the lens cap

¶U

Plug in the adaptor to the connection point on the
camera. Please make sure that you use the AC
adaptor with the correct specification.Failure to do
so may affect your warranty.

-Digimax210SE(02~47) 00.10.24 8:32 AM

‰¿Ã¡ˆ16

Summary of Contents for Digimax 210 SE





























































Search results

Summary of Contents for Digimax 210 SE

Reviews:

Related manuals for Digimax 210 SE

Brands by name

Popular brands

Samsung Digimax 210 SE, User Manual

Search results

Summary of Contents for Digimax 210 SE

Reviews:

Related manuals for Digimax 210 SE

Brands by name

Popular brands