6 3
CONNECTION TO AN EXTERNAL MONITOR
Connection to an external monitor.
°§
Connect the video connection terminal on the Digimax 210 to an external
monitor with a connection cable. Set the Digimax to play mode or moving
images to view them on the external monitor. The LCD monitor will
automatically switch off.
¢—
The information on the external screen will be exactly the same as on the
LCD monitor on the camera.
°·
Selecting the Video output type
°§
You can select an NTSC or PAL video output signal, depending on the
external equipment.
¢—
Refer to the [setup the Video output mode] on page 51 about the
selecting the video output indicator from the camera.
Reference
°§
When using a TV as an external monitor, you will need to select the
external or AV channel.
°§
If there is noise (the picture is fuzzy) please refer to your TV manual
for more information.
°§
If the picture is not in the centre of the screen, please use the TV
controls to centre it.
6 2
PLAY MODE
°§
You can print out the saved images in compact memorycard as much as you
set up with the digital photo printer which supports DPOF.
DPOF (
Direct Print Ordering Format
)
If you put the LCD/ button under the state of the first monitor display
in the play mode, the below messages appear on a liquid monitor.
1
Press the LCD/ button once to display 'No of prints 'message on the
monitor. Use the left and right directional buttons to change the print
number.
¢—
The maximum print number is 9
2
After removing the compact flash card and inserting it into a digital photo
printer, you will be able to print out the preset images.
3
D P O F
D P O F
-Digimax210SE(48~71) 00.10.24 8:34 AM
D
‰¿Ã¡ˆ62
