SAMSUNG
System Administration and Special Features Guide
DCS-816
March 1999
3 - 8
3.9 PROGRAM PERSONAL SPEED DIAL NUMBERS FOR
OTHER STATIONS
[MMC 105]
Individual station users can program their own speed dial numbers. When necessary,
however, this program allows the system administrator to view or change any station's
speed dial numbers. The station speed dial codes are 00-49. Each station can have up to
10 numbers (00-09) by default and can be assigned more in blocks of 10 (up to a maxi-
mum of 50 numbers).
Each speed dial number consists of a line access code and the telephone number to be
dialled. The access code can be any line group, individual line, station group or individual
extension. The speed dial number can be up to 32 characters long including
#
,
FLASH
and
PAUSE
.
NOTE: If Least Cost Routing (LCR) is being used, the LCR access code must be entered.
When you are entering a speed dial number, there are some special keys that you can
use. These are the last six programmable keys of your keyset referred to as
A, B, C, D, E
and
F,
and are defined below.
PROGRAM KEYS
UP & DOWN
Selects a station.
KEYPAD
Used to enter number.
HOLD
Press to clear entry.
A
Does not have a function.
B
Inserts a FLASH.
C
Inserts a PAUSE.
D
Changes the dialling type from pulse to tone.
E
Hides and displays digits.
F
Toggle to MMC 106 to program speed dial name
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Select
105
[201] SPEED DIAL
00 :
2. Dial the station number (e.g.,
205
)
OR press UP or DOWN to select the station and press
[205] SPEED DIAL
00 :
the right soft key to move the cursor
OR press the left soft key to go to step 4
3. If the selected station has no speed dial blocks, this
display will be shown and a new station may be
[205] SPEED DIAL
NO SPEED BLOCK
selected
