20_
setting up
setting up your side-by-side refrigerator
INSTALLING THE WATER DISPENSER LINE(CONT’D)
Connecting the water line to the refrigerator
1. Remove the cap from water line on the unit and insert compression nut to the water line on the
unit after disassembling from provided water line.
2. Connect both water line from the unit and water line in the kit.
3. Tighten the compression nut onto the compression fi tting. There should be no gaps between
(A, B & C)
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 6.5 mm of the plastic tubing to make sure
you get a snug, leak-free connection.
Before being used, the leakage in these places should be examined.
• Samsung Warranty does not cover WATER LINE INSTALLATION.
• It will be done at customer’s charge unless the retail price
includes installation cost.
• Please contact Plumber or Authorized Installer for the installation
if needed.
• If Water leakage occurs due to improper installation, please
contact installer.
When using power cord
To prevent power cord damage, after product installation, arrange
the remaining power cord to the unit cover and fi x.
CAUTION
Non operation
During operation
Loosen a
Loosen a
Remove
Remove
cap
cap
Water Line
Water Line
from unit
from unit
Water Line
Water Line
from unit
from unit
No gap
No gap
DA68-02535A(0.0).indb 20
DA68-02535A(0.0).indb 20
2012.10.11 11:48:3 AM
2012.10.11 11:48:3 AM
Summary of Contents for DA68-02535A
Page 74: ...DA68 02535A 0 0 indb 2 DA68 02535A 0 0 indb 2 2012 10 11 11 48 42 AM 2012 10 11 11 48 42 AM ...
Page 75: ...DA68 02535A 0 0 indb 3 DA68 02535A 0 0 indb 3 2012 10 11 11 48 42 AM 2012 10 11 11 48 42 AM ...
Page 76: ...DA68 02535A 0 0 indb 4 DA68 02535A 0 0 indb 4 2012 10 11 11 48 42 AM 2012 10 11 11 48 42 AM ...
