Samsung DA68-02535A, User Manual

Page: 14 / 108

14_ setting up
setting up your side-by-side refrigerator
SETTING UP THE REFRIGERATOR(CONT’D)
If your entrance will not allow the refrigerator to pass easily through it, you can remove the doors.
Tools you will need
Removing the front leg cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three
screws counter-clockwise.
Separating the water supply line from the refrigerator
1. Remove two water lines (gray one is for ice and the other one is for water) by pressing the coupler
1
and pulling the water line 2 away.
Reattaching the water supply line
1. The Water line must be fully inserted to the
marked line to prevent water leakage from the
dispenser.
2. Insert the 2 clips in the install pack and
check that each clip holds the line fi rmly.
These clips are for door re-installation only.
The water line must be fully inserted to the marked line to prevent water leakagefrom the dispenser.
FRONT LEG COVER
SCREW
1
2
Make sure the color of the
water lines match.
Line
Coupler Coupler Coupler Coupler
clip A
6.35 mm clip A
6.35 mm
Coupler Coupler Coupler Coupler
Philips Screwdriver Flat-blade Screwdriver 10 mm Socket Wrench
DA68-02535A(0.0).indb 14 DA68-02535A(0.0).indb 14 2012.10.11 11:47:51 AM 2012.10.11 11:47:51 AM