setting up
_15
01 SETTING UP
Removing the freezer door
A few things to mention fi rst.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
• Is necesary two people for disassembling doors.
1.
With the Freezer door closed, remove the upper hinge cover
1
using a screwdriver, and then
disconnect the wires
2
.
Be careful, no damage sensor harness with cover hinge.
2.
Remove hinge bolts
3
with a 10 mm Socket Wrench and a ground screw
4
counter-clockwise, and
take off the upper hinge
5
in the direction of the arrow. Be careful when removing the door to ensure
that it does not fall on you.
3.
Before remove the bolts desassembling Cover Leg front and hoses. Open the Freezer door before lifting
it up. Remove the door from the lower hinge
6
by carefully lifting the door
7
.
4.
Remove the lower hinge
8
from the lower hinge bracket
9
by lifting the lower hinge in the direction of
the arrow.
Make sure to put the water line through the lower hinge before assembling it.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order.
CAUTION
CAUTION
2
1
8
9
4
5
3
7
6
DA68-02535A(0.0).indb 15
DA68-02535A(0.0).indb 15
2012.10.11 11:47:53 AM
2012.10.11 11:47:53 AM
Summary of Contents for DA68-02535A
Page 74: ...DA68 02535A 0 0 indb 2 DA68 02535A 0 0 indb 2 2012 10 11 11 48 42 AM 2012 10 11 11 48 42 AM ...
Page 75: ...DA68 02535A 0 0 indb 3 DA68 02535A 0 0 indb 3 2012 10 11 11 48 42 AM 2012 10 11 11 48 42 AM ...
Page 76: ...DA68 02535A 0 0 indb 4 DA68 02535A 0 0 indb 4 2012 10 11 11 48 42 AM 2012 10 11 11 48 42 AM ...
