Initial settings and testing of the machine
_ 36
3.
Press the
Device name
input area.
The pop-up keyboard appears.
Remove the existing device name and enter the device name you want to use and then press
OK
. Then press
Next
.
Keep in mind to enter the device name to be used on the network.
•
If necessary, enter the location of the machine in the
Location
input area.
•
If necessary, enter the information in the
Administrator
input area for the person to contact when any
problem occurs on the machine.
4.
Press the
Test
button to verify the LAN connection. When
Connected
appears after pressing
Test
, press
Next
.
If
Not connected
appears, make sure that the machine is connected to the network then verify the LAN connection
again.
•
If a network connection problem persists, contact your network administrator.
•
If you installed an optional fax kit or finisher, press each
Test
button for verify connection of them.
install_guide_english.book Page 36 Saturday, July 21, 2012 4:53 PM
Summary of Contents for CLX-9252 Series
