21
1. Introduction
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
"Installing driver over the network" on page 139).
•
If you are a Macintosh Linux
SG
or UNIX operating systems user, refer to the
"Installation for Macintosh" on page 130
,
"Installation for Linux" on page
132, or "Installing the UNIX printer driver package" on page 145
.
•
The installation window in this
User’s Guide
may differ depending on the
machine and interface in use.
•
Selecting
Custom Installation
allows you to choose which programs to
install. When the installation window appears, select
Custom
Installation
. You can select the XPS/PS printer driver or other software
applications in the
Select Software
window.
•
Only use a USB cable no longer than 3 meters (118 inches).
12
Windows
1
Make sure that the machine is connected to your computer and
powered on.
If the “
Found New Hardware Wizard
” appears during the installation
procedure, click
Cancel
to close the window.
2
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click
Start
>
All programs
>
Accessories
>
Run
.
X:\
Setup.exe
replacing “X” with the letter, which represents your CD-
ROM drive and click
OK
.
3
Select
Install Now
.
4
Read the
License Agreement
, and select
I accept the terms of the
License Agreement
. Then, click
Next
.
5
Follow the instructions in the installation window to complete the
installation process.
