manualshive.com logo in svg

Samsung CLP-300N/XEU, Service Manual

Share
Download
Samsung CLP-300N/XEU Service Manual Download Page 133

Reference Information

Samsung Electronics

Service Manual

12-1

12

12

12. Reference Information

This chapter contains the tools list, list of abbreviations used in this manual, and a guide to the
location space required when installing the printer. A definition of tests pages and Wireless
Network information definition is also included.

12.1 Tools for Troubleshooting

The following tools are recommended safe and easy troubleshooting as described in this service manual.

• 

DVM(Digital Volt Meter)

Standard : Indicates more than 3 digits.

• Driver

Standard : "-" type, "+" type (M3 long, M3 short, M2

long, M2 short).

• Tweezers

Standard : For general home use, small type.

• Cotton Swab

Standard : For general home use, for medical service.

• Cleaning Equipments

Standard : An IPA(Isopropyl Alcohol)dry wipe tissue or a

gentle neutral detergent and lint-free cloth.

• Vacuum Cleaner

• Brush

• Software (Driver) installation CD ROM

Install Driver CD

Network S/W CD

Summary of Contents for CLP-300N/XEU










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands