GB
19
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆
Plug & Auto Set up (see page 13)
◆
Automatically
◆
Manually (see page 20)
You can store up to 80 stations.
1
Press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to select the
INSTALLATION
option.
3
Press the ENTER button to select this option.
Result:
The
INSTALLATION
menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
AUTO SET
UP
option is selected.
And then press the ENTER button to select this option.
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5
Press ENTER to start the auto scanning.
Result:
◆
The
PLEASE WAIT
indication flashes on the
television screen.
◆
The first frequency band is scanned and the first
station found is displayed and stored.
◆
The DVD-VCR then searches for the second station
and so on.
◆
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
➢
◆
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 21).
VCR
AUTO SET UP
PLEASE WAIT
2
%
I--------------------I
RETURN
YOUR DATA WILL BE LOST
PRESS
ENTER
TO CONTINUE
RETURN
TO EXIT
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
❷
ENTER
MAIN MENU
INSTALLATION
RETURN
❷
➛ ❿
ENTER
00096Q DVD-CHT350/XSG-GB2 11/20/03 11:48 AM Page 19
