The Timer Programming feature allows you to preset the DVD-
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
☛
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result:
The
Timer Programme
is displayed.
2
Press OK or
❿
to select the input source.
3
Select the required station or input source (LINE) by pressing
the
,
❷
buttons.
4
Press
❿
to select the recording day.
5
Select the required day by pressing the
or
❷
buttons.
6
Press
❿
to select the recording start time.
7
Select the required hour value by pressing the
or
❷
buttons.
8
Press
❿
to select the minutes.
9
Select the required minute value by pressing the
or
❷
buttons.
10
Press
❿
to select the recording stop time.
11
Select the required recording stop time by pressing the
or
❷
buttons, following the same procedure as when selecting the
recording start time.
12
Press
❿
to select the recording speed.
13
Press the
or
❷
buttons to select the
SP
(Standard Play),
LP
(Long Play),
Auto
(Auto Tape Speed Select) recording speeds.
14
When you have finished, press the RETURN button.
15
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
➢
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVD-
VCR automatically switches to LP mode to record the
whole programme.
Using the Timer Programming Feature
33
GB
VCR
15
00462A CHT-2010/HACO-GB2 5/12/04 6:41 PM Page 33
