Samsung CHT-2010 Instruction Manual Download Page 34

Page: 34 / 75

Checking a Preset Recording

Cancelling a Preset Recording

You can check your preset recordings:

◆

When you have finished presetting the DVD-VCR

◆

If you have forgotten which programmes will be
recorded

Press TIMER on the remote control.
Result:

The

Timer Programme

is displayed.

Press the

❷

buttons to select the required programme.

Press the ,

❷

➛

❿

buttons to select and change any values

as required. For more details, refer to the previous page.

On completion, press RETURN three times.

You can cancel any programmes that are:

◆

Incorrect

◆

No longer required

Press TIMER on the remote control.
Result:

The

Timer Programme

is displayed.

Select the programme to be cancelled by pressing the

❷

buttons.

Press the CLEAR button to cancel the selected programme.
Result:

All the recording information is deleted and the
broadcast will not be recorded.

On completion, press RETURN three times.

VCR

00462A CHT-2010/HACO-GB2 5/12/04 6:41 PM Page 34

Summary of Contents for CHT-2010












































































Search results

Summary of Contents for CHT-2010

Reviews:

Related manuals for CHT-2010

Brands by name

Popular brands

Samsung CHT-2010, Instruction Manual

Search results

Summary of Contents for CHT-2010

Reviews:

Related manuals for CHT-2010

Brands by name

Popular brands