Samsung CHT-200 Instruction Manual Download Page 50

Page: 50 / 72

During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the

❿

(Play/Still) button.

Still

Press the

❿

ll (Play/Still) button on the remote control during

playback.

• The picture will still and the audio will mute.
• To resume playback, press the

❿

ll (Play/Still) button.

• If the player is left in Still mode for 5 minutes, it will stop

automatically.

Frame Advance (Step)

While in Still mode, press the F.ADV/STEP button on the remote
control to advance one frame at a time.

• Audio is muted during Frame Advance mode.
• Press

❿

ll (Play/Still) to resume normal playback.

NOTE: Frame Advance operates only in the forward direction.

Skip Forward/Back

While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (

❿❿

l / l

➛➛

) buttons on the remote control or front

panel to jump forward and backward through disc chapters/tracks.

• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous

chapter/track.

Search Forward/Back

While a disc is in Play mode, press and hold the Forward/Back
(

❿❿

➛➛

) buttons on the remote control or front panel to visually

search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press

❿

ll (Play/Still) button to resume normal speed.

NOTE: During CD playback

❿❿

➛➛

buttons on the remote control

don’t operate.

Slow Motion

During playback, press the

❿

ll (Play/Still) button to Still the image.

Then use the Forward (

❿❿

) to play in slow motion at variable

speeds.

• Each press increases the slow motion speed playback to 1/8, 1/4

or 1/2 of normal speed.

• Audio is muted during slow motion playback.
• Front Panel Slow Motion Buttons - Press the Forward buttons on

the front panel to activate slow motion playback. Press the

❿

(Play/Still) button to resume normal playback.

Stop/Resume

• Press the Stop button once to stop playback. To resume the

DVD/CD from the point where the disc stopped, press the

❿

(Play/Still) button.

• Press the

■

(Stop) button twice to completely stop playback.

The next time you press

❿

ll (Play/Still), the disc will start over

from the beginning.

Special Playback Features

DVD

INFO.

CLEAR

RETURN

/A. DUB

INFO.

CLEAR

RETURN

/A. DUB

OPEN/CLOSE

MUTE

INFO.

CLEAR

RETURN

/A. DUB

F.ADV / STEP

AUDIO

00334A CHT200/AFR-GB3 12/9/03 10:07 AM Page 50

Summary of Contents for CHT-200









































































Search results

Summary of Contents for CHT-200

Reviews:

Related manuals for CHT-200

Brands by name

Popular brands

Samsung CHT-200, Instruction Manual

Search results

Summary of Contents for CHT-200

Reviews:

Related manuals for CHT-200

Brands by name

Popular brands