GB
31
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
Before presetting a recording, check that the date and
time are correct.
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press
❿
to select the input source.
3
Select the required station by pressing the
,
❷
buttons.
4
Press
❿
to select the recording day.
5
Select the required day by pressing the
or
❷
buttons.
6
Press
❿
to select the recording start time.
7
Select the required hour value by pressing the
or
❷
buttons.
8
Press
❿
to select the minutes.
9
Select the required minute value by pressing the
or
❷
buttons.
10
Press
❿
to select the recording end time.
11
Select the required recording end time by pressing the
or
❷
buttons, following the same procedure as when selecting the
recording start time.
12
Press
❿
to select the recording speed.
13
Press the
or
❷
buttons to select the
SP
(Standard Play),
LP
(Long Play),
AUTO
(Auto Tape Speed Select) recording speeds.
14
When you have finished, press the RETURN button.
15
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
VCR
1/JAN TUE
12:09
PR DAY START
→
STOP
1 SA 9 12:00
→
12:50SP
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
❷
SET:
❿
RETURN DELETE:CLEAR
STANDBY/ON
TV
STANDBY/ON
15
00334A CHT200/AFR-GB2 12/9/03 10:04 AM Page 31