background image

Unpacking

1

1

Installing the Base Stand

3

3

Operating Your Remote Control

2

2

Connecting the Aerial

4

4

Turning the TV On for the First Time

6

6

Connecting to the Mains Socket

5

5

Target Region Descriptor

7

7

GB

Connect one end of the RF coaxial cable to the aerial socket on the 

wall and the other end of the cable to the RF (75Ω) socket at the rear 

right side of your TV.

Do not connect the TV to the mains supply until you 

have completed all the connections.

1. Connect the mains cable to the mains socket after you have 

completed all the connections.

2. At this stage, the TV switches to standby mode. The red LED 

indicator will illuminate on the front panel of the TV.

3. In standby mode, press the      button on the right side panel of the 

TV or on the remote control to turn the TV on. The red LED 

indicator will turn blue.

To mains 

socket

Remove all packaging from the TV. Retain the packaging. 

If you dispose of it please do so according to any local 

regulations.

Make sure the (+) and ( – ) ends 

of the batteries match the (+) 

and ( – ) ends indicated in the 

battery compartment.

1. Press and lift the back cover to open the 

battery compartment of the remote 

control.

2. Insert two AAA size batteries. Close the 

battery compartment cover.

TV 
TV Stand Support

Quick Start Guide

TV Base
Remote Control / 

AAA Batteries x 2

Instruction Manual 

Screw A x 2
Screw B x 3 

1.  Lay the TV down on a flat surface with the back side facing up. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is 

placed beneath the screen.

2. To install the TV stand, first attach the stand support to the TV by using screw A. Align the screw holes then use 2 screw A to fix the stand support to the TV.
3. To install the base stand, align the screw holes, then secure with a screw driver (not included) using the 3 screw B provided.

screw

screw

Quick Start Guide

L26HED12N

Thank you

 for purchasing your new Logik TV.

Your new TV incorporates the latest technology to enhance your 

viewing experience. We would suggest that you allow about 20 

mins for initial setup. 

Please follow this guide for a successful first time installation.

26" HD Ready LED TV with DVD Player

USB

HDMI2

HDMI1

PC IN

RF

COMMON  INTERFACE (CI)

HEADPHONE

PC AUDIO

RF Coxial Cable

(not included)

OR

Screw A x 2

(P.N.: 209100430B1)

Screw B x 3

(P.N.: 209060410B1)

TV Front

Base Stand

Front

Target Region Setting

Country Code

GBR

Primary Region

England

Secondary Region
Tertiary Region

London

During tuning your TV may have received signals 

from more than one transmitter. If this has occurred 

the Target Region Descriptor screen will be 

displayed. This will enable you to select the correct 

regional transmission for the local news service that 

you require.
Press the        buttons to adjust each option's setting 

and then press the OK button to confirm.

This will be shown as GBR for the UK.

This will show the regional country 

(England, Wales, Scotland, NI).

This will allow you to set the region for 

your local news service on BBC and 

ITV (London, Beds and Cambs etc).

You may receive signals from more than 

one transmitter within the Secondary 

Region, (e.g Beds and Cambs may have 

Luton or Sandy Heath).

The first time you turn the TV on, it will go straight into First Time Installation menu.

(P.N.: 4033C266104)

Well done,

 

your new TV is now ready to use. You will find that there are many exciting features available. To get to know all these 

features, please take some time to read the instruction manual provided with your TV.

1.  Press the OK button to start 

First Time Installation 

menu.

2.  Press the               buttons 

to select your desired 

language to be displayed 

on the menu. The default 

on-screen menu language 

is set as English. Press the 

OK button to confirm.

3.  Press the         buttons to 

select DVB-T / DVB-C and 

then press the OK button to 

confirm. 

3a. If you select DVB-T, press the buttons 

to select the desired country and then 

press the OK button to start tuning.

4.  Channel tuning will commence. This 

operation may take up to 6 minutes. 

The display will show the progress of 

the tuning and the number of channels 

found.

First Time Installation

Please ensure aerial is plugged in!

Then press OK button.

Dansk

Deutsch

Hrvatski

Italiano

 OSD Language

OK                                         

Magyar

Nederlands

Norsk

Polski

English

Cesky

E           k

Espanol

~

Fran  ais

Portugues

Pycck

DVB-C

DVB SELECT TYPE

DVB-T

Tune Type                               DTV+ATV

UK

Australia

Austria

Belgium

Bulgaria

Croatia

Czech

Denmark

Finland

MENU

DVB-C Scan Menu

Scan type

Full

610000

Auto

Auto

Frequency

Network ID

Symbol(ks/s)

OK    

   

   MENU

Channel Tuning

TV     :  3 Channel(s)
DTV  :  0 Channel(s)
Radio  :  0 Channel(s)
Data  :  0 Channel(s)

36%...     668.75MHz     (TV)

Please press MENU to skip.

3b. If you select DVB-C, the next step is to 

configure the DVB-C system (Scan 

type / Frequency / Network ID / 

Symbol(ks/s). Press the OK button to 

go to the tune type and add country 

select menu. This step is the same as 

the DVB-T's select the tune type (DTV 

/ ATV) process. Press the               

buttons to select the desired country 

and then press the OK button to start 

tuning.

Summary of Contents for L26HED12N








Reviews: