Samsung CFTD2083 Owner'S Instructions Manual Download Page 24

Page: 24 / 99

HAPTER

HREE

: TV O

PERATION

Press the LEFT/RIGHT

œ√

√

buttons.

TV will begin memorizing

all of the available chan-
nels.

T V O

P E R AT I O N

Storing Channels in Memory (Automatic Method)

▼

The TV automatically cycles

through all of the available channels
and stores them in memory. This
takes about one to two minutes.

Press the RIGHT

√

button at any

time to interrupt the memorization
process and return to the Channel
menu.

Press the UP/DOWN

▲▼

buttons to select “Auto
Program”.

First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~2
on previous page.

Press the UP/DOWN

▲▼

buttons to select
“Channel”, then press the
LEFT/RIGHT

œ√

√

buttons.

After all the available
channels are stored, the
Auto program menu disap-
pears. Press the

MENU

button to exit.

Summary of Contents for CFTD2083




































































































Search results

Summary of Contents for CFTD2083

Reviews:

Related manuals for CFTD2083

Brands by name

Popular brands

Samsung CFTD2083, Owner'S Instructions Manual

Search results

Summary of Contents for CFTD2083

Reviews:

Related manuals for CFTD2083

Brands by name

Popular brands