Samsung C34H890W Series User Manual Download

Page: 29 / 49

Picture Size

Change the picture size.

―

This menu is not available when

PIP/PBP Mode

is set to

and the

Size

is set to

(PBP Mode).

―

This option is not available when

FreeSync

is enabled.

mode

•

Auto

: Display the picture according to the aspect ratio of the input source.

•

Wide

: Display the picture in full screen regardless of the aspect ratio of the input source.

mode

•

4:3

: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.

•

16:9

: Display the picture with an aspect ratio of 16:9.

•

21:9

: Display the picture with an aspect ratio of 21:9.

•

Screen Fit

: Display the picture with the original aspect ratio without cutting off.

―

The function may not be supported depending on the ports provided with the product.

―

Changing the screen size is available when the following conditions are satisfied.

―

A digital output device is connected using the HDMI/DP/USB Type-C cable.

―

The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).

―

This can only be set when the external input is connected through HDMI/DP/USB Type-C and

PC/AV

Mode

is set to

Screen Adjustment

―

This menu is only available when

Picture Size

is set to

Screen Fit

Mode.

When a 480P or 576P or 720P or 1080P signal is input in

mode and the monitor can display normally,

select

Screen Fit

to adjust horizontal position in 0-6 levels.

Configuring H-Position & V-Position

H-Position

: Move the screen to the left or right.

V-Position

: Move the screen up or down.

Summary of Contents for C34H890W Series


















































Search results

Summary of Contents for C34H890W Series

Reviews:

Related manuals for C34H890W Series

Brands by name

Popular brands

Samsung C34H890W Series, User Manual

Search results

Summary of Contents for C34H890W Series

Reviews:

Related manuals for C34H890W Series

Brands by name

Popular brands