Samsung C34H890W Series User Manual Download

Page: 9 / 49

Preparations

Chapter 02

Parts

Control Panel

―

The color and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.

Power LED

PRESS(ENTER)

LEFT

RIGHT

DOWN

JOG Button

Return

Function Key Guide

Icons

Description

JOG Button

Multi directional button that helps navigate.

―

The JOG button is located on the rear left side of the product. The
button can be used to move up, down, left or right, or as Enter.

Power LED

This LED is power status indicator and works as

•

Power On (Power button): Off

•

Power saving mode: Blinking

•

Power Off (Power button): On

―

The power Indicator operation can be swapped by changing in the
menu. (

System

Power LED On

) Actual models because of functional

variation maybe haven’t this function.

Function Key Guide

Press the JOG button when the screen is turned on. The Function Key
Guide will appear. To access the onscreen menu when the guide is
displayed, press the corresponding direction button again.

―

Function Key Guide may vary depending on the function or product
model. Please refer to the actual product.

Summary of Contents for C34H890W Series


















































Search results

Summary of Contents for C34H890W Series

Reviews:

Related manuals for C34H890W Series

Brands by name

Popular brands

Samsung C34H890W Series, User Manual

Search results

Summary of Contents for C34H890W Series

Reviews:

Related manuals for C34H890W Series

Brands by name

Popular brands