Samsung BN68-01983A-00 User Manual Download

Page: 9 / 32

English -

Installing Batteries in the Remote Control

Lift the cover at the back of the remote control upward as shown in the figure.

Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the

compartment.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the

remote control for a long time.

If the remote control doesn’t work, check the following:

Is the TV power on?

Are the plus and minus ends of the batteries reversed?

Are the batteries drained?

Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?

OPERATION

Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

Operation the OSD (On Screen Display)

The access step may differ depending on the selected menu.

Press the

MENU

button.

The main menu appears on the screen. The menu’s left side has icons :

Picture, Sound,

Channel, Setup, Input.

Press the ▲ or ▼ button to select one of the icons.

Then press the

ENTER

button to access the icon’s sub-menu.

Press the ▲ or ▼ button to select the icon’s submenu.

Press the ◄ or ► button to decrease or increase the value of a particular item. The

adjustment OSD may differ depending on the selected menu.

Press the

ENTER

button to complete the configuration. Press the

EXIT

button to exit.

•

❑

I-II

MENU

Button

Display the main on-screen menu.

ENTER

/ DIRECTION Buttons

Move the cursor and select an

item. Select the currently selected

item. Confirm the setting.

RETURN

Button

Return to the previous menu.

EXIT

Exit the on-screen menu.

Mode

: Dynamic



Backlight

Contrast

Brightness

Sharpness

Colour

Tint (G/R) G 0

R 0

Advanced Settings



Picture Options



Reset

: OK



Move

Enter

Return

Picture

Mode

: Dynamic

Backlight

Contrast

Brightness

Sharpness

Colour

Tint (G/R) G 0

R 0

Advanced Settings



Picture Options



Reset

: OK



Move

Enter

Return

Picture

Help icon

▲

Backlight

▼

Move

Adjust

Return

[530]BN68-01983A-00Eng.indb 7

2009-03-17 �� 5:36:23

Summary of Contents for BN68-01983A-00

































Search results

Summary of Contents for BN68-01983A-00

Reviews:

Related manuals for BN68-01983A-00

Brands by name

Popular brands

Samsung BN68-01983A-00, User Manual

Search results

Summary of Contents for BN68-01983A-00

Reviews:

Related manuals for BN68-01983A-00

Brands by name

Popular brands