manualshive.com logo in svg

Samsung AVXCSH023/032/040CE, Service Manual, Page: 210 / 363

Share
Download
Samsung AVXCSH023/032/040CE Service Manual Download Page 210

Troubleshooting

Samsung Electronics

4-126

4-4-33  

 : OLP protection control caused comp. down

Yes

Yes

No

Check the EEV.

No

Open the sub valve.

No

Connect S-net to vacuum. (forceful)

No

All the sub valves open?

The outdoor/indoor EEV operates normally?

Check the amount of coolant.

1.   How to check

Test operation

Yes

Replace the OLP sensor.

Check the pipeline.

No

Clogging in the pipeline?

(ex-filter)v

OLP sensor is resistance is normal?

(Refer to E320.)

Outdoor unit display

 

Indoor unit display

 ×(Operation)    

◑

(Timer)    

◑

(Fan)    

◑

(Filter)    

◑

(Defrost)

Criteria 

 • OLP SENSOR temp above Trip_Dis.

Cause of problem 

 • See if the sub valve is open.
 • Check the amount of coolant.
 • Check the OLP sensor.

Summary of Contents for AVXCSH023/032/040CE












































































































































































































































































































































































Reviews:

No comments