manualshive.com logo in svg

Samsung AVXCSH023/032/040CE, Service Manual, Page: 205 / 363

Share
Download
Samsung AVXCSH023/032/040CE Service Manual Download Page 205

Troubleshooting

4-121

Samsung Electronics

4-4-27  

 : Freezing control causes comp. down

Yes

Yes

Yes

Same as when checking other temp sensors.

No

Check the EEV.

No

Check the indoor fan.

No

The indoor FAN/MOTOR operates normally?

The indoor EEV operates normally?

The indoor heat exchanger sensor displays the tem-

perature ok?

Check for clogging in the suction area of the indoor 

machine.

1.   How to check

Outdoor unit display

 

Indoor unit display

 ×(Operation)    

◑

(Timer)    

◑

(Fan)    

◑

(Filter)    

◑

(Defrost)

Criteria 

 • All the operating indoor machines do not reach -4°C for more than five minutes

Cause of problem 

 • Check if the indoor FAN/MOTOR operates normally.
 • Check if the indoor EEV operates normally.
 • Check the indoor heat exchanger's IN/OUT sensor. 
 • Check for clogging in the suction area of the indoor machine.

Summary of Contents for AVXCSH023/032/040CE












































































































































































































































































































































































Reviews:

No comments