Samsung AVMKH020EA4 Service Manual Download Page 230

Page: 230 / 270

Samsung Electronics

Troubleshooting

11-44

Phenomenon

Check method

• The T-cond rises rapidly.

• The high pressure of system rises rapidly.

• The auto reset is frequent due to the operation of high

pressure switch.

• S-NET displays the driving of outdoor unit fan, but the fan

does not drive actually.

The defect of a fan motor.

• The obstacles are piled beside the outdoor unit

heat exchanger. The outdoor unit is installed wrong at

the airtight site.

→

Check the installation status and remove the obstacles.

11-5-6 No driving of outdoor unit fan/Clogging of the surroundings of outdoor unit heat exchanger

24103A(1)_2 12/23/05 12:57 PM Page 6-101

Summary of Contents for AVMKH020EA4















































































































































































































































































Search results

Summary of Contents for AVMKH020EA4

Reviews:

Related manuals for AVMKH020EA4

Brands by name

Popular brands

Samsung AVMKH020EA4, Service Manual

Search results

Summary of Contents for AVMKH020EA4

Reviews:

Related manuals for AVMKH020EA4

Brands by name

Popular brands