manualshive.com logo in svg

Samsung AM038KXWDCH, Service Manual, Page: 82 / 295

Share
Download
Samsung AM038KXWDCH Service Manual Download Page 82

Troubleshooting

Samsung Electronics

79

If the Auto Trial Operation is not completed-  UP is 
displyed(UnPrepared)

Prior to starting the air conditioning operation after the initial  
installation and Auto Trial Operation is carried out. 
This process, the stable operation to protect the system and verify  
the defect of the product.

1.  Tracking is complete and after the initial installation, if you do not 

have a history of Auto Trial Operation is completed, UP will be  
displayed.

2.  Execute the Auto Trial Operation by Tact Switch. 
3.  UP display disappears after Auto Trial Operation is complete, normal 

operation is possible. 

4.  Auto Trial Operation is completed, if there is a history, normal  

operation execution.

No 

Yes

Was Auto Trial Operation

Completed?

Power On

Trial Operation available

LED display the UP (UnPrepared)

Preliminary check for the Test Operation

Execute the Auto Trial Operation

4-3 Appropriate Measures for Different Symptom

4-3-1  Outdoor Unit Test Operation Flow

Summary of Contents for AM038KXWDCH








































































































































































































































































































Reviews:

No comments