Samsung AJ TNLDEG Series, Installation Manual, Page: 28 / 34

Installation Procedure
Ins
tallation Pr
oc
edur
e
English
Setting an indoor unit installation option (suitable for the condition of each installation location)
• The indoor unit installation option are set to 020000-100000-200000-300000 by default.
• Set the indoor unit option by wireless remote controller. When entering Address option, connect remote controller
receiver.
Installation options
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 2 Reserved
Use of external
room temperature
sensor / Minimizing
fan operation when
thermostat is off
Use of central control
Compensation of the
fan RPM
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 Using of drain pump Use of Hot Coil Use of Heater
Controller variables
for auxiliary heater
Reserved
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2
Use of external
control
Setting the output of
external control
Ionizer Buzzer Control Hours of filter usage
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3
Individual control
with remote control
Heating setting
compensation offset
Reserved Reserved Reserved
• Even if you set the Use of drain pump (SEG8) option to 0, it is automatically set to 2 (the drain pump is used with 3
minute delay).
• If you set the Maximum filter usage time (SEG18) option to a value other than 2 and 6, it is automatically set to 2
(1000 hours).
• If you set an option to a value that is out of range specified above, the option is automatically set to 0 by default.
• The external output of SEG15 is generated via MIM-B14 connection. (Refer to the manual of MIM-B14.)
• If you set the Individual control with remote control (SEG20) option to a value other than 0 to 4, it is automatically
set to 0 (Indoor 1).
28