55
EN
G
LIS
H
How to connect your extended power cables
f
f
Items to prepare
Tools
Crimping plier
Connection sleeve (mm)
Insulation tape
Contraction tube (mm)
Spec
MH-14
20xØ6.5(HxOD)
Width 19mm
70xØ8.0(LxOD)
Shape
1. As shown in the figure, peel off the shields from the rubber/wire of the power
cable.
- Peel off 20mm of the wire shields of the tube installed already.
(Unit: mm)
120
60
20
20
20
180
Power cable(provided by us)
20
Power cable (provided by us)
• After peeling off the tube wire, you must insert a contraction tube.
CAUTION
2. Insert both sides of core wire of the power cable into the connection sleeve.
f
f
Method 1
Push the core wire in to the sleeve from both sides.
Connection sleeve
• After peeling off the tube wire, you must insert a contraction tube.
CAUTION
f
f
Method 2
Twist the wire cores together and push it in to the sleeve.
Connection sleeve
3. Using a compressor, compress the two points and flip it over and compress another two points in the same location.
- The compression dimension should be 8.0.
- After compressing it, pull both sides of the wire to make sure it is firmly pressed.
Comp. dim.
f
f
Method 1
Compress it 4 times
5mm
f
f
Method 2
Compress it 4 times
5mm
4. Apply heat to the contraction tube to contract it.
f
f
Method 1
40mm
Insulation tape
f
f
Method 2
Insulation tape
35mm
사우디,남아공향 FAC MEMORY 냉난방_IBIM_EN_03892A(2).indd 55
2013-04-17 오전 11:07:53
