7
English
Ins
tallation Pr
oc
edur
e
1500
or mor
e
600
or more
600
or more
300
or more
600
or more
600
or more
600
or more
300
or mor
e
500
or mor
e
500
or mor
e
300
or more
300
or more
CAUTION
• The outdoor unit must be installed according to the
specified distances in order to permit accessibility
from each side, to guarantee correct operation,
maintenance, and repair of the unit.
The components of the outdoor unit must be
reachable and removable under safe conditions for
people and the unit.
Moving the outdoor unit with wire rope
1
Before carrying the outdoor unit, fasten two wire
ropes of 8 m or longer, as shown in the figure.
2
To prevent damages or scratches effectively, insert a
piece of cloth between the outdoor unit and the ropes.
3
Move the outdoor unit.
Wire rope
Plate protection
cloth
Step 2 Fixing the outdoor unit in place
Install the outdoor unit on a rigid and stable base to
prevent disturbance from any noise caused by vibration.
When installing the unit at a height or in a location
exposed to strong winds, fix the unit securely to a
support (i.e., a wall or a ground).
Fix the outdoor unit with anchor bolts. Make sure that
the anchor bolts are 20 mm or higher from the base
surface.
Anchor bolt hole
(Unit : mm)
AC071KXA
✴
EH
(Unit : mm)
Anchor bolt hole
AC100/125/145KXA
✴✴
H
CAUTION
• Install a drain outlet at the lowest end around the
base for outdoor unit drainage
• When installing the outdoor unit on the roof,
waterproof the unit and check the ceiling strength.
360_AC_Outdoor_AU_Eng_EN.indb 7
2016-09-20 오후 8:00:29
