Samsung 955DF - SyncMaster 955 DF User Manual Download Page 56

Page: 56 / 56

Service

Terms

Regulatory

Natural Color

Authority

Information in this document is subject to change without notice.
© 2003 Samsung Electronics Co., Ltd. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Samsung Electronics
Co., Ltd. is strictly forbidden.

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.

Samsung

is the registered trademark of Samsung Electronics Co., Ltd.;

Microsoft

Windows

and

Windows NT

are registered trademarks of Microsoft Corporation;

VESA

DPMS

and

DDC

are

registered trademarks of Video Electronics Standard Association; the

NERGY

TAR

name and

logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an
E

NERGY

TAR

Partner, Samsung Electronics Co., Ltd. has determined that this product meets

the E

NERGY

TAR

guidelines for energy efficiency. All other product names mentioned herein

may be the trademarks or registered trademarks of their respective owners.

Summary of Contents for 955DF - SyncMaster 955 DF

























































Search results

Summary of Contents for 955DF - SyncMaster 955 DF

Reviews:

Related manuals for 955DF - SyncMaster 955 DF

Brands by name

Popular brands

Samsung 955DF - SyncMaster 955 DF, User Manual

Search results

Summary of Contents for 955DF - SyncMaster 955 DF

Reviews:

Related manuals for 955DF - SyncMaster 955 DF

Brands by name

Popular brands