Samsung 900SL, 900SL Plus Owner'S Instructions Manual Download Page 2

Page: 2 / 29

Information in this document is subject to change without notice.
© 1999 Samsung Electronics Co., Ltd. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co.,
Ltd. is strictly forbidden.

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.

The

Samsung logo

and

SyncMaster

are registered trademarks of Samsung Electronics Co., Ltd.;

Microsoft, Windows

and

Windows NT

are registered trademarks of Microsoft Corporation;

VESA,

DPMS

and

DDC

are registered trademarks of Video Electronics Standard Association; the

NERGY

TAR

name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an
E

NERGY

TAR

Partner, Samsung Electronics Co., Ltd. has determined that this product meets the E

NERGY

TAR

guidelines for energy efficiency. All other product names mentioned herein may be the trademarks

or registered trademarks of their respective owners.

900SLe1.book Page ii Tuesday, January 11, 2000 10:03 AM

Summary of Contents for 900SL, 900SL Plus






























Search results

Summary of Contents for 900SL, 900SL Plus

Reviews:

Related manuals for 900SL, 900SL Plus

Brands by name

Popular brands

Samsung 900SL, 900SL Plus, Owner'S Instructions Manual

Search results

Summary of Contents for 900SL, 900SL Plus

Reviews:

Related manuals for 900SL, 900SL Plus

Brands by name

Popular brands