Samsung 6806-1247 User Manual Download

Page: 55 / 120

SETTING UP PLAY BACK FUNCTIONS

Setting up play back function by using the camera button

THUMBNAIL / ZOOM W button

You can view up to 9 images at a time by using the THUMBNAIL function.

1. Turn the camera power on.
2. Rotate the mode dial to the PLAY mode.
3. An image displays on the LCD monitor.
4. Press the THUMBNAIL ( ) button.

The thumbnail display will highlight the image that had been showing at the time the
thumbnail mode was selected.

5. Press the

buttons to move to the desired image. Selected image is

highlighted. Icons are displayed to indicate the type of file selected.

6. When viewing a thumbnail image, press the [ZOOM T] button and the selected shot will

show in single display mode.

- : Movie clip file

- : DPOF indicator

- : Sound recorded file

Press THUMBNAIL button

[ Single display mode ]

Highlighted image

(selected image)

[ Thumbnail display mode ]

The PLAY mode can be set using the camera button.

2002/ 1/ 1/ 00 : 00

13/13

SELECT

OK SET

S3400001.JPG

Summary of Contents for 6806-1247

























































































































Search results

Summary of Contents for 6806-1247

Reviews:

Related manuals for 6806-1247

Brands by name

Popular brands

Samsung 6806-1247, User Manual

Search results

Summary of Contents for 6806-1247

Reviews:

Related manuals for 6806-1247

Brands by name

Popular brands