Samsung 6806-1247 User Manual Download

Page: 116 / 120

SOFTW

ARE

FAQ

About USB

Please check the following if the USB connection malfunctions.

[Case 1] The camera power is off.

Turn the camera power on.

We recommend using an AC power adapter in PC mode. If you use batteries,

check the battery condition.

[Case 2] The mode dial is not set to PC mode.

Rotate the mode dial to PC mode.

PC interfacing is available only in PC mode.

[Case 3] USB Driver is not installed correctly.

Install the USB Driver correctly. Refer to pages 86

[Case 4] The USB cable is not connected or you are using a cable with an incorrect

specification.

Use a USB cable with the correct specification.

[Case 5] The CF CARD is not inserted or the camera can’t recognize the CF CARD.

Turn the camera power off and insert the CF CARD again.

[Case 6] Occasionally the computer recognizes the USB as another device.

Install the camera driver correctly.

Turn the camera power off and remove the USB cable.

Connect the USB cable again and turn the camera power on.

Then the computer should now recognize the camera.

Summary of Contents for 6806-1247

























































































































Search results

Summary of Contents for 6806-1247

Reviews:

Related manuals for 6806-1247

Brands by name

Popular brands

Samsung 6806-1247, User Manual

Search results

Summary of Contents for 6806-1247

Reviews:

Related manuals for 6806-1247

Brands by name

Popular brands