80
81
●
RGB Only Mode
Adjusts the red, green, and blue levels individually.
Try Now
●
Color Space
Adjusts the range of colors that can be expressed on screen.
Auto
automatically adjusts the
color space depending on the input signal, and
Native
applies a range that is wider than the input
signal.
Custom
allow the user to manually adjust a range of the desired color in the colors of the
input signal.
Try Now
"
Custom
mode is only available with LED 6300 series and above.
●
White Balance
Adjusts the color temperature of the picture to make white objects look white and the overall
picture appear natural. Adjust each color's luminosity with the offset menu and the brightness
with the gain menu. To restore the default values, select
Reset
.
Try Now
●
10p White Balance
This function is not available with LED 4300, 5500 series and PDP 5500 series.
Adjusts the white balance by adjusting the brightness of the red, green, and blue elements in
10-point intervals. This option is only available when
Picture Mode
is set to
Movie
and may not
be supported by some external devices.
●
Gamma
Adjusts the primary color intensity.
Try Now
●
Expert Pattern
This function is not available with LED 4300, 5500 series and PDP 5500 series.
Displays picture calibration patterns on the screen without using a separate pattern generator or
filter.
Pattern1
is used to calibrate the contrast, and
Pattern2
is used for calibrating the color and
color saturation. If the screen menu disappears or a different menu is activated while the screen
is being calibrated, this option will save the changes up to that point and automatically deactivate
that menu. This feature is enabled in Component and HDMI modes only.
●
Motion Lighting
Adjusts the picture brightness depending on the on-screen movements for reduced power
consumption. This feature is only available when
Picture Mode
is set to
Standard
and is not
available in 3D mode. In addition, adjusting
Contrast
or
Brightness
automatically deactivates this
feature.
Try Now
