22
23
11
Set
Network type
to
Wired
and then select
Connect
.
Network Settings
Select your network type.
Network type
Wired
Connect
Plug a network cable into
the back of your TV.
21
Select
Stop
when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
IP Settings
.
Network Settings
Connection verification cancelled.
Wired network connection test is stopped.
Change Network
IP Settings
Retry
Close
31
From the
IP Settings
screen, set
IP Setting
to
Enter manually
, enter
IP Address
,
Subnet Mask
,
Gateway
, and the
DNS Server
values, and then select
OK
.
IP Settings
IP Setting
Enter manually
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
DNS Setting
Enter manually
DNS Server
0.0.0.0
OK
Cancel
41
The TV attempts to connect to the network again using the specified settings. A confirmation
message is then shown once a connection is established. Select
OK
to proceed.
