Samsung 4 channel DVR User Manual Download

Page: 73 / 116

English

_73



WEB VIEWER

USING SEARCH VIEWER

The Search Viewer screen consists of following :

This displays the IP address and the model name of the connected DVR.

There are 4 tabs available: <

LIVE

>, <

SETUP

>, <

ABOUT

Switch to a split mode.

Shows the IP address and model name of the connected DVR.

Select to turn the sound on/off.

These buttons are used for capture, print, and save the image.

This displays a calendar at which you can search the recorded video.

This displays a timeline at which you can search the recorded video by the time.

These buttons are used for controlling playback.

This displays the screen for playback of recorded video.



SEQUENCE

>, <

> buttons are not available in SEARCH menu.



During the DVR backup, you may have a trouble accessing CMS & Web Search.

Summary of Contents for 4 channel DVR





















































































































Search results

Summary of Contents for 4 channel DVR

Reviews:

Related manuals for 4 channel DVR

Brands by name

Popular brands

Samsung 4 channel DVR, User Manual

Search results

Summary of Contents for 4 channel DVR

Reviews:

Related manuals for 4 channel DVR

Brands by name

Popular brands