Samsung 4 channel DVR User Manual Download

Page: 64 / 116

64_

search & play

Motion Search

If a motion is detected in each channel, you can set a desired area to perform the search.

You can use the mouse to select the related items.

Select <

Motion Search

> in the <

> menu.

Use direction buttons (

◄ ►

) to set the search criteria

and press the [

ENTER

] button.



If you set the motion area to <

Manual Area

>, the <

Setup

button will be activated.

•

Motion Region : Select an area to perform the search.

- All Area : Searches for all areas of the selected channel.

- Current Area : Searches for the motion area for each

channel specified in “

Motion Detection

Setting the Motion Detection Area

”. (Page 52)

- Manual Area : You can set the motion area manually.

•

Setup : The Setup button will be activated only if you have
set the motion area to Manual. Press this button to display
the area setting window.

•

Date/Time : The Date/Time will be automatically set by the
hour, and the end time will be automatically set to one hour
later than the start time if it is set.

•

Preview : Select a data item in the list to display the still
image of the item.

Select a data item and click <

Play

The screen switches to the motion data playback mode.

Motion Region

Cancel

Apply to All CH

CH1

Individual

Motion Search

Date/Time

2011-01-01 03:41:18

2011-01-01 05:11:44

Play

Return

No.

Start

Time

01:01:30

01:01:25

01:01:20

01:01:15

01:01:10

01:01:05

01:01:01

Previous/Next Page

Channel

CAM 01

Motion Region

All Area

Setup

2011/01/01 01:01:30

Go to First

Go to Last

Overlapped Data

List1

Summary of Contents for 4 channel DVR





















































































































Search results

Summary of Contents for 4 channel DVR

Reviews:

Related manuals for 4 channel DVR

Brands by name

Popular brands

Samsung 4 channel DVR, User Manual

Search results

Summary of Contents for 4 channel DVR

Reviews:

Related manuals for 4 channel DVR

Brands by name

Popular brands