background image

of the Program a copy of this License along with the 
Program.

You may charge a fee for the physical act of transferring 
a copy, and you may at your option offer warranty 
protection in exchange for a fee.

2. 

You may modify your copy or copies of the Program 

or any portion of it, thus forming a work based on the 
Program, and copy and distribute such modifications or 
work under the terms of Section 1 above, provided that 
you also meet all of these conditions:

a)  You must cause the modified files to carry 

prominent notices stating that you changed the 
files and the date of any change.

b)  You must cause any work that you distribute or 

publish, that in whole or in part contains or is 
derived from the Program or any part thereof, to 
be licensed as a whole at no charge to all third 
parties under the terms of this License.

c)  If the modified program normally reads commands 

interactively when run, you must cause it, when 
started running for such interactive use in the 
most ordinary way, to print or display an 
announcement including an appropriate copyright 
notice and a notice that there is no warranty (or 
else, saying that you provide a warranty) and that 
users may redistribute the program under these 
conditions, and telling the user how to view a copy 
of this License. (Exception: if the Program itself is 
interactive but does not normally print such an 
announcement, your work based on the Program 
is not required to print an announcement.)

These requirements apply to the modified work as a 
whole. If identifiable sections of that work are not 
derived from the Program, and can be reasonably 
considered independent and separate works in 
themselves, then this License, and its terms, do not 
apply to those sections when you distribute them as 
separate works. But when you distribute the same 
sections as part of a whole which is a work based on 
the Program, the distribution of the whole must be on 
the terms of this License, whose permissions for other 
licensees extend to the entire whole, and thus to each 
and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or 
contest your rights to work written entirely by you; rather, 
the intent is to exercise the right to control the distribution 
of derivative or collective works based on the Program.

In addition, mere aggregation of another work not 
based on the Program with the Program (or with a work 
based on the Program) on a volume of a storage or 
distribution medium does not bring the other work 
under the scope of this License.

3.

 You may copy and distribute the Program (or a work 

based on it, under Section 2) in object code or 
executable form under the terms of Sections 1 and 2 
above provided that you also do one of the following:

a)  Accompany it with the complete corresponding 

machine-readable source code, which must be 
distributed under the terms of Sections 1 and 2 
above on a medium customarily used for software 
interchange; or, 

b)  Accompany it with a written offer, valid for at least 

three years, to give any third party, for a charge no 
more than your cost of physically performing 
source distribution, a complete machine-readable 
copy of the corresponding source code, to be 
distributed under the terms of Sections 1 and 2 
above on a medium customarily used for software 
interchange; or, 

c)  Accompany it with the information you received as 

to the offer to distribute corresponding source 
code. (This alternative is allowed only for 
noncommercial distribution and only if you 
received the program in object code or executable 
form with such an offer, in accord with Subsection 
b above.) 

The source code for a work means the preferred form 
of the work for making modifications to it. For an 
executable work, complete source code means all the 
source code for all modules it contains, plus any 
associated interface definition files, plus the scripts used 
to control compilation and installation of the executable. 
However, as a special exception, the source code 
distributed need not include anything that is normally 
distributed (in either source or binary form) with the 
major components (compiler, kernel, and so on) of the 
operating system on which the executable runs, unless 
that component itself accompanies the executable.

If distribution of executable or object code is made by 
offering access to copy from a designated place, then 
offering equivalent access to copy the source code 
from the same place counts as distribution of the 
source code, even though third parties are not 
compelled to copy the source along with the object 
code.

4. 

You may not copy, modify, sublicense, or distribute 

the Program except as expressly provided under this 
License. Any attempt otherwise to copy, modify, 
sublicense or distribute the Program is void, and will 
automatically terminate your rights under this License. 
However, parties who have received copies, or rights, 
from you under this License will not have their licenses 
terminated so long as such parties remain in full 
compliance.

5. 

You are not required to accept this License, since 

you have not signed it. However, nothing else grants 
you permission to modify or distribute the Program or 
its derivative works. These actions are prohibited by law 
if you do not accept this License. Therefore, by 
modifying or distributing the Program (or any work 
based on the Program), you indicate your acceptance 
of this License to do so, and all its terms and conditions 
for copying, distributing or modifying the Program or 
works based on it.

6. 

Each time you redistribute the Program (or any work 

based on the Program), the recipient automatically 
receives a license from the original licensor to copy, 
distribute or modify the Program subject to these terms 
and conditions. You may not impose any further 
restrictions on the recipients’ exercise of the rights 
granted herein. You are not responsible for enforcing 
compliance by third parties to this License.

Summary of Contents for 4 channel DVR





















































































































Reviews: