Samsung 2 COLOR THERMAL PRINTER SRP-275, Operator'S Manual

Page: 81 / 111

5-91
ESC J n
[Name] Execute n/72 inch paper feed one time
[Format] ASCII ESC J n
Hex 1B 4A n
Decimal 27 74 n
[Range] 1
≤
n
≤
255
[Default] ------
[Description] After printing data in the line buffer, paper is fed n/72 of an inch in the paper
feed direction. Line feed amount is unaffected even if double-high characters
and double-high/wide characters exist in the same line.
The single line feed setting value is not changed by this command.
ESC I n
[Name] Execute n/144 inch paper feed one time
[Format] ASCII ESC I n
Hex 1B 49 n
Decimal 27 73 n
[Range] 1
≤
n
≤
255
[Default] ------
[Description] After printing data in the line buffer, paper is fed n/144 of an inch in the paper
feed direction. Line feed amount is unaffected even if double-high characters
and double-high/wide characters exist in the same line.
The single line feed setting value is not changed by this command.
5-90
CONTROL COMMANDS LIST
CHAPTER 5
FF
[Name] Form feed
[Format] ASCII FF
Hex 0C
Decimal 12
[Range] ------
[Default] ------
[Description] This command performs the following operations after the printer prints the
printing data in the line buffer.
Operations are set by the Memory Switch
(*1) Paper feed to cutting position: Executes a 1 inch paper feed.
(*2) Paper feed to tear-bar position: Executes a 7/6 inch paper feed.
Refer to the explanations on memory switches in each of the printer’s
product specification manuals for details regarding Memory Switch settings.
MSW
Condition 1
Condition 3
Cutter model
Executes a form feed.
Feeds paper to the cutting
position and performs a full cut.
(*1)
Executes a form feed.
Feeds paper to the cutting
position and performs a partial
cut. (*1)
Tear-bar model
Executes a form feed.
Paper is fed to the tear-bar
position. (*2)
Executes a form feed.
Paper is fed to the tear-bar
position. (*2)
Condition 2
Condition 4