manualshive.com logo in svg

Samsung 2 COLOR THERMAL PRINTER SRP-275, Operator'S Manual

Share
Download
Samsung 2 COLOR THERMAL PRINTER SRP-275 Operator'S Manual Download Page 4

SRP-275

All rights reserved. No part of this publication may reproduced, stored in a retrieval, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written
permission of SAMSUNG ELECTRO-MECHANICS.

No patent liability is assumed with respect to the use of the information contained herein. While every
precaution has been taken in the preparation of this book, SAMSUNG ELECTRO-MECHANICS assumed no
responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of
the information contained herein. 

Neither SAMSUNG ELECTRO-MECHANICS nor its affiliates shall be liable to the purchaser of this product or
third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of :
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product,
or (excluding the U.S.) failure to strictly comply with SAMSUNG ELECTRO-MECHANICS  s operating and
maintenance instructions.

SAMSUNG ELECTRO-MECHANICS shall not be liable against any damages or problems arising from the
use of any options or ant consumable products other than those designated as Original Samsung products or
Samsung Approved products by SAMSUNG ELECTRO-MECHANICS.

Notice

The contents of this manual are subject to change without notice.
Copyright ' 2004 SAMSUNG ELECTRO-MECHANICS. CO., LTD

EMC and Safety standards Applied

WARNING

The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this device. You are
cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.

CE Marking

WARNING

Violating following instructions can cause serious injury or death.

Keep the desiccant out of children

’

s reach.

If not,  they may eat it.

Install the printer on the stable surface.

If the printer falls down, it can be broken and you can
hurt yourself.

Use only approved accessories and do not try to
disassemble, repair or remodel it for yourself.

Call your dealer when you need these services.

Do not let water or other foreign objects in the printer.

If this happened, switch off and unplug the printer before
calling your dealer. 

Do not use the printer when it is out of order. 
This can cause a fire or an electrocution.

Switch off and unplug the printer before calling your dealer.

Safety Precautions

TO UNPLUG

PRINTER

PRINTER

PROHIBITED

PROHIBITED

PROHIBITED

DISASSEMBLING

PROHIBITED

Do not bend the cable by force or leave it under
any heavy object.

A damaged cable can cause a fire.

PROHIBITED

Summary of Contents for 2 COLOR THERMAL PRINTER SRP-275
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands