Samsung 018 Series User & Installation Manual Download Page 4

Page: 4 / 55

Safety precautions

WARNING

State of California Proposition 65 Warning (US only)
WARNING : This product contains chemicals known to the State of California

to cause cancer and birth defects or other reproductive harm.

Before using your new air conditioner, please read this manual thoroughly

to ensure that you know how to safely and efficiently operate the extensive

features and functions of your new appliance.

Because the following operating instructions cover various models,

the characteristics of your air conditioner may differ slightly from those

described in this manual. If you have any questions, call your nearest contact

center or find help and information online at www.samsung.com.

What the icons and signs in this user manual mean:

WARNING

Risk of death or serious personal injury.

CAUTION

Potential risk of personal injury or material damage.

CAUTION

To reduce the risk of fire, explosion, electric shock, or

personal injury when using your air conditioner, follow

these basic safety instructions:

Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions carefully.
Disconnect/remove power from the unit.
Make sure the machine is grounded to prevent electric shock.
Call the contact center for help.

These warning signs are here to prevent injury to you and others.

Please follow them carefully.

After reading this section, keep it in a safe place for future reference.

User manual

Summary of Contents for 018 Series
























































Search results

Summary of Contents for 018 Series

Reviews:

Related manuals for 018 Series

Brands by name

Popular brands

Samsung 018 Series, User & Installation Manual

Search results

Summary of Contents for 018 Series

Reviews:

Related manuals for 018 Series

Brands by name

Popular brands