Samson TROVIS SAFE 3730-6, Mounting And Operating Instructions

Page: 124 / 184

124 EB 8384-6S EN
Operating the positioner
7.11 Enabling and selecting parameters
All codes and their meaning and default settings are listed in the code list in section 11.3.
Codes which are marked with an asterisk must be enabled with Code 3 before the associat
-
ed parameters can be configured as described below.
Turn until Code 3 appears (reading: No ).
Press , the code number 3 blinks.
Change the setting in Code 3.
Turn until YES appears.
Press , reading:
Configuration is enabled.
You can now configure codes one after the
other:
Turn to select the required code.
Press to activate the selected code. The
code number starts to blink.
Turn to select the setting.
Press
to confirm the selected setting.
Code 3
Configuration not en -
abled
Configuration enabled
If no settings are entered within 120 seconds, the enabled configuration function becomes in -
valid and the display returns to Code 0.
Cancel the setting:
To cancel a value before it is confirmed (by pressing ) proceed as follows:
Turn until ESC appears.
Press to confirm.
The entered value is not adopted.
Canceling the reading