Proceed as follows:
Turn rotary switch “Configuration and
parameterization“ to “Times-of-use”.
Display shows:
1
q
Select period/day for times-of-use:
1 = Monday, 2 = Tuesday , ..., 7 = Sunday,
1-7 = daily
Activate editing mode for period/day.
Display shows:
1*, START
* The display 1 (2, 3) indicates the first (second, third)
time-of-use.
Activate editing mode for start time.
and
blink.
q
Edit start time (steps of 30 minutes).
Confirm start time.
Display shows:
STOP
q
Edit stop time (steps of 30 minutes).
Confirm stop time.
Display shows:
2, START
The second and third time-of use are set similar to the
first one.
q
Select
End
.
Exit active data point “Period/day“.
To set the times-of-use for additional days, repeat the instructions in the fields highlighted in
gray.
Return rotary switch “Configuration and parameterization“ to
INFO
.
Display shows: time
Note!
Do not use the
1–7
menu to check the adjusted times-of-use as only the times-of-use for
Monday are displayed under this data point, which are then adopted for the whole week.
12
EB 5433 EN
Operation
