Samson TROVIS 5431, Mounting And Operating Instructions

Page: 23 / 102

Changing the times-of-use
You can set the times-of-use separately for
the heating system, the drinking water heat-
ing system and the circulation pump. You
can directly access the time-of-use for the
heating system via the control switch (A). The
times-of-use for drinking water heating and
the circulation pump are set on the parame-
ter level PA2. For the symbols, refer to page
79. For all other adjustments, proceed as
described below.
You can set three different periods for the
time-of-use for each of the above systems.
Example: You want to change the
times-of-use for all days of a week. Up to
now, the period set for the time-of-use was
7:00 (a.m.) to 22:00 (10 p.m., factory set-
ting). Now, you want to change the
times-of-use to the following setting: 6:00
(a.m.) to 8:00 (a.m.), from 12:00 (p.m.) to
14:00 (2 p.m.) and from 19:00 (7 p.m.) to
23:00 (11 p.m.). To enter these settings, pro-
ceed as follows:
EB 5431 EN
23
Operation
Press Display Effect
Set the con-
trol switch
(A) to
NOTE : You can also adjust
times-of-use on levels PA1 and PA2.
(either
or
)
Pressing the arrow keys (up or down)
lets you choose the day(s) for which
you want to change the time-of-use:
1-7 (all days of a week), 1-5 (Monday
to Friday), 6-7 (Saturday and Sunday)
or 1, 2, , 7 (Monday, Tuesday, ,
Sunday). For this example, select 1-7.
NOTE: When selecting 1-7, 1-5 or 6-7, the times-of-use on those days are
reset to factory default. Therefore, do not use these menus to check the
times-of-use settings! To check, use the individual days 1, 2, ...7 only!