Samson TROVIS 5431, Mounting And Operating Instructions

Page: 16 / 102

3.3.2 Changing the system code number
The heating controller differentiates between
five system types which have been assigned
system code numbers ranging from 1 to 5.
These are determined in the configuration
level under Anl (system code number). It not
only identifies the heating controller inputs
and outputs, but also determines the
selectable function blocks and parameters.
For an overview of the system types and the
associated system code number, refer to
chapter 4.
To change the system code number you must
know the code number, proceeding as fol-
lows:
16
EB 5431 EN
Operation
Press Display Effect
Set the
control switch
(A) to
The display should mirror this image,
otherwise press both arrow keys
together (several times, if required)
until The display indicates COPA! This is the
gateway to the configuration level.
This appears on the display. You are
required to enter the code number.