Samson TROVIS 3730-1, Translation Of Original Instructions

Page: 11 / 144

EB 8484-1 EN 1-5
Safety instructions and measures
1.3 Notes on possible property damage
NOTICE !
Risk of damage to the positioner due to incorrect mounting position.
Î
Do not mount the positioner with the back of the device facing upward.
Î
Do not seal or restrict the vent opening when the device is installed on site.
An incorrect electric signal will damage the positioner.
A current source must be used to power the positioner.
Î
Only use a current source and never a voltage source.
Incorrect assignment of the terminals will damage the positioner and will lead to mal -
function.
For the positioner to function properly, the prescribed terminal assignment must be ob-
served.
Î
Connect the electrical wiring to the positioner according to the prescribed terminal
assignment.
Malfunction due to initialization not yet completed.
The initialization causes the positioner to be calibrated to adapt it to the mounting situa-
tion. After initialization is completed, the positioner is ready for use.
Î
Initialize the positioner on first start-up.
Î
Re-initialize positioner after changing the mounting position.
Risk of positioner damage due to incorrect grounding of the electric welding
equipment.
Î
Do not ground electric welding equipment near to the positioner.