EB 9527-3 EN
31
Memory pen communication
Table 7:
Memory pen status
Memory pen status
Display
Process
Write and read
MEMWR
or
MEMRD
Write data from Media 6 to the memory pen
or
read Media 6 data from the memory pen
Read only
MEMRD
Read Media 6 data from the memory pen
Write only
MEMWR
Write data from Media 6 to the memory pen
Transfer data from Media 6 to the memory
pen or from the memory pen to Media 6
Write and read status
Insert the memory pen into the serial inter-
face.
MEMWR
appears on the top of the display.
Press
or
key to switch between
MEMWR
(= write data from Media 6 to
the memory pen) and
MEMRD
= (read data from memory pen
to Media 6)
−
MEMRD
: activate write protection by set-
ting switch
4
to
ON
.
Press to activate setting.
RUN
appears on the display.
DONE
in
-
dicates that the data are saved to the
Media 6. Remove the memory pen.
MEMRD
: activate write protection by set-
ting switch
4
to
ON
.
Transfer data from the memory pen to
Media
6
Read only status
Deactivate write protection by setting switch
4
to
OFF
.
Insert the memory pen into the serial inter-
face.
MEMRD
appears on the top of the display.
Press key to start reading data.
RUN
appears on the display.
DONE
indicates that the data are saved
to the Media 6. Remove the memory
pen.
Activate write protection by setting switch
4
to
ON
.
Transfer data from Media 6 to the memory
pen
Write only status
Insert the memory pen into the serial inter-
face.
MEMWR
appears on the top of the display.
Press key to start writing data.
Key
RUN
appears on the display.
DONE
in
-
dicates that the data are saved to the
memory pen. Remove the memory pen.
Summary of Contents for Media 6 Z
