![background image](http://html1.mh-extra.com/html/samson/media-05/media-05_mounting-and-operating-instructions_3788973005.webp)
EB 9520 EN
5
Safety instructions and measures
Notes concerning oxygen service
Devices intended to measure gaseous oxygen are labeled
Oxygen! Keep free of oil and grease!
These versions are cleaned and assembled under special conditions. When replacing parts
that come into contact with gaseous oxygen, e.g. range springs, wear suitable gloves and
make sure that the parts do not come into contact with oil or grease.
When returning devices for oxygen service for repair, the sender assumes full responsibility
that the devices are handled to meet all requirements stipulated by VBG 62 or similar regula-
tions until they are handed over to the manufacturer. Otherwise, SAMSON does not accept
any responsibility.
Reasonably foreseeable misuse
The Media 05 Differential Pressure and Flow Meter is
not
suitable for the following applica-
tions:
−
Use outside the limits defined during sizing and by the technical data
Furthermore, the following activities do not comply with the intended use:
−
Use of non-original spare parts
−
Performing maintenance activities not specified by SAMSON
Qualifications of operating personnel
The device must be mounted, started up and serviced by fully trained and qualified person-
nel only; the accepted industry codes and practices are to be observed. According to these
mounting and operating instructions, trained personnel refers to individuals who are able to
judge the work they are assigned to and recognize possible hazards due to their specialized
training, their knowledge and experience as well as their knowledge of the applicable stan-
dards.
Personal protective equipment
We recommend wearing the following protective equipment depending on the process medi-
um:
−
Protective clothing, gloves, eye protection and respiratory protection in applications with
hot, cold and/or corrosive media
Î
Check with the plant operator for details on further protective equipment.