Samson FOUNDATION 3730-5, Mounting And Operating Instructions

Page: 71 / 132

EB 8384-5 EN 71
Start-up and settings
NOTICE
Perform a reset before re-initializing
the positioner if the substitute posi
-
tioner has already been initialized.
Refer to section 7.8.
Enable configuration:
Note:
If no settings are entered within 120
seconds, the enabled configuration
function becomes invalid.
Enable configuration
Default: No
Turn
g
Code 3, display: No
Press , Code 3 blinks.
Turn

YES
Press , display:
Enter the pin position and nominal range:
mm
Pin position
Default: No
mm
Nominal range
(locked when Code 4 = No)
Turn

Code 4
Press , Code 4 blinks.
Turn

Pin position on lever (see relevant
section on attachment)
Press .
Turn

Code 5
Press , Code 5 blinks.
Turn

Nominal travel of the valve
Press .
Select the initialization mode:
Init mode
Default MAX
Turn

Code 6
Press .
Turn

SUb
Press to confirm the SUb as the initializa-
tion mode.
Enter the direction of action:
Direction of action
Default

Turn

Code 7
Press , Code 7 blinks.
Turn

Direction of action (
ää
/
äæ
)
Press .
