EB 8384-5 EN
19
Attachment to the control valve – Mounting parts and accessories
4
Attachment to the control
valve – Mounting parts and
accessories
NOTICE
Risk of malfunction due to incorrect
sequence of mounting, installation
and start-up!
Keep the following sequence.
1.
Remove the protective film from the
pneumatic connections.
2.
Mount the positioner on the control
valve.
3.
Connect the supply air.
4. Connect the electrical power.
5. Perform the start-up settings.
The positioner is suitable for the following
types of attachment:
−
Direct attachment to SAMSON
Type 3277 Actuator
−
Attachment to actuators according to
IEC 60534-6 (NAMUR)
−
Attachment according to VDI/VDE 3847
−
Attachment to Type 3510 Micro-flow
Valve
−
Attachment to rotary actuators
NOTICE
Risk of malfunction due to incorrect
mounting parts/accessories or incor
-
rect assignment of lever and pin posi-
tion.
Attach the positioner to the control
valve only using the mounting parts
and accessories as specified in Ta
-
ble 1 to Table 6. Observe the type of
attachment.
Travel tables
Note:
The
M
lever is included in the scope of delivery.
S, L, XL levers for attachment according to IEC 60534-6 (NAMUR) are available as
accessories (see Table 3).
Direct attachment to Type 3277-5 and Type 3277 Actuators
Actuator size
Rated travel Adjustment range at positioner
1)
Required
lever
Assigned pin
position
[cm²]
[mm]
Travel [mm]
120
7.5
5.0
to
25.0
M
25
120/175/240/350
15
7.0
to
35.0
M
35
355/700/750
30
10.0
to
50.0
M
50
Attachment according to IEC 60534-6 (NAMUR)
SAMSON valves with
Type 3271 Actuator
Adjustment range at positioner
1)
Other control valves
Required
lever
Assigned pin
position
Actuator size
Rated
travel
Min. travel
Max. travel
[cm²]
[mm]
[mm]
[mm]
60 and 120
with Type 3510 Valve
7.5
3.6
18.0
S
17
120
7.5
5.0
25.0
M
25
120/175/240/350
15
7.0
35.0
M
35
700/750
7.5
355/700/750
15 and 30
10.0
50.0
M
50
1000/1400/2800
30
14.0
70.0
L
70
60
20.0
100.0
L
100
1400/2800
120
40.0
200.0
XL
200
See manufacturer’s
specifications
200
See manufacturer’s specifications
XXL
300
Rotary actuators
Required lever
Assigned pin
position
Opening angle
24
to
100°
M
90°
1)
The min./max. adjustment range is based on the
NOM
(nominal range)
initialization mode
Summary of Contents for FOUNDATION 3730-5
