Samson EB 8075 EN, Mounting And Operating Instructions

Page: 31 / 80

EB 8075 EN 4-3
Shipment and on-site transport
4.3.1 Transporting the valve
The control valve can be transported using
lifting equipment (e.g. crane or forklift).
Î
Leave the control valve in its transport
container or on the pallet to transport it.
Î
Observe the transport instructions.
Transport instructions
− Protect the control valve against external
influences (e.g. impact).
− Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
− Protect the piping and any mounted
valve accessories against damage.
− Protect the control valve against moisture
and dirt.
− The permissible transportation tempera-
ture of standard control valves is –20 to
+65 °C (–4 to +149 °F).
Contact our after-sales service for the trans-
portation temperatures of other valve ver-
sions.
Note
Fig. 4-1: Lifting points on the control valve: with Type 3271 Pneumatic Actuator and flanges (left) and
with welding ends (middle) · With piston actuator and additional lifting eyelets (right)