background image

12  

EB 3009 EN

Maintenance

7  After-sales service

Contact SAMSON's After-sales Service de-
partment for support concerning service or 
repair work or when malfunctions or defects 
arise.

E-mail address

SAMSON's After-sales Service department: 
[email protected]

Addresses of SAMSON AG and its subsid

-

iaries

The addresses of SAMSON AG, its subsid-
iaries, representatives and service facilities 
worldwide can be found on the SAMSON 
website, in all SAMSON product catalogs or 
on the back of these Mounting and Operat-
ing Instructions.
To assist diagnosis and in case of an unclear 
mounting situation, specify the following de-
tails:

 

Device type and nominal size

 

Order number/date and product number

 

Configuration ID

 

Upstream and downstream pressure

 

Medium temperature and process medi-
um

 

Min. and max. flow rate in m³/h

 

Is a strainer installed?

 

Installation drawing showing the exact 
location of the regulator and all the ad-
ditionally installed components (shut-off 
valves, pressure gauge etc.)

6.1  Tests

Detailed test instructions 

u

 SH 3009

They describe testing in the workshop and in 
the installed state.
The maintenance intervals depend on the in-
tervals between regular testing and the 
scope of the testing. A five-year interval has 
proven suitable under normal operating and 
ambient conditions. We recommend replac-
ing parts subject to wear on performing this 
maintenance work.

Summary of Contents for 42-10 RS





















Reviews: