Samson 3271-5, Mounting And Operating Instructions

Page: 21 / 52

EB 8310-1 EN 21
Preparation
4.3 Storage
Risk of actuator damage due to improper
storage.
−
Observe storage instructions.
−
Avoid long storage times.
−
Contact SAMSON in case of different stor
-
age conditions or longer storage times.
We recommend regularly checking the actu
-
ator and the prevailing storage conditions
during long storage times.
Storage instructions
−
When the valve and actuator are al-
ready assembled, observe the storage
conditions for control valves. See associ-
ated valve documentation.
−
Protect the actuator against external in-
fluences (e.g. impact).
−
Do not damage the corrosion protection
(paint, surface coatings). Remove any
damage immediately.
−
Protect the actuator against moisture and
dirt. Store it at a relative humidity of less
than 75 %. In damp spaces, prevent con
-
densation. If necessary, use a drying
agent or heating.
−
Make sure that the ambient air is free of
acids or other corrosive media.
−
The permissible storage temperature is
between –20 and +65 °C.
−
Do not place any objects on the actuator.
Special storage instructions for elastomers
Elastomer, e.g. actuator diaphragm
−
To keep elastomers in shape and to pre-
vent cracking, do not bend them or hang
them up.
−
We recommend a storage temperature of
15 °C for elastomers.
−
Store elastomers away from lubricants,
chemicals, solutions, and fuels.
SAMSON's After-sales Service department
can provide more detailed storage instruc-
tions on request.
NOTICE
!
Note
Tip